Husky H4910DSG Guida di Installazione Scaricare il pdf (Pagina 1)

5 HUSKYTOOLS.COM

Please contact 1-888-43-HUSKY for further assistance.

Installation

Cleaning the air hose

□ A 1/4” air hose is required, with a maximum length of 25 ft.

□ Clean the air hose of accumulated dust and moisture

before connecting it to the air supply.

NOTE: If a longer air hose is required, connect a 3/8" air

hose to the 1/4" air hose to ensure the spray gun has the

necessary air supply.

Connecting to the air supply

□ Always use clean dry air. Excessive moisture and dirt will

greatly reduce the life of any air motor. We recommend the

installation of an in-line lter-regulator as close to the tool

as possible.

□ Ensure all hoses and ttings are the correct size and

secured tightly.

WARNING: Lubricators should not be used with spray

guns. The use of an inline lubricator will damage the paint

nish.

Recommended Air Line Set-Up

Part Description

A Spray Gun

B Regulator

C Quick Plug

D Quick Coupler

E Air Hose

F In-line Filter

G Air Compressor

5 HUSKYTOOLS.COM Please contact 1-888-43-HUSKY for further assistance.Installation1 Cleaning the air hose □ A 1/4” air hose is required, with a m

Nessun commento

Husky H4910DSG Guida di Installazione Pagina 1